2+3axles One Drag and One Hang Transportation Skeletal Full Trailer
1.product parameter:
| full semi trailer |
| Overall demension |
13800x2500x1550mm |
| Loading capacity |
20Ton+60Ton |
Main beam
(material :Q345) |
Beam height :500mm
Upper plate:14mm
Down plate:16mm
Middle plate:8mm |
| Side beam |
16# U shaped steel |
| Main Beam |
Q345 carbon steel |
| Kingpin |
3.5' interchangeable,JOST brand |
| Towbar length |
1800mm from the front of towbar to the platform of trailer |
| Turnplate |
Mechanical |
| Axle |
Fuwa/2x13ton+ 3x13ton the brand can be optional |
| Suspension type |
Mechanical normal suspension |
| Leaf spring |
10/10/10 (10X90X13mm) |
| Tire |
Triangle/double star/chengshan/double coin/chaoyang 12R22.5 16PR 12pcs optional |
| Wheel rim |
9.0-22.5 12pcs |
| Twist lock |
12 pcs use for 1X60ft ;2x20ft container transport |
| Plateform thickness |
3mm checkered plate |
| Brake chamber |
4 double 2 single |
| Tool box |
One |
| Spare tire carrier |
2 pcs |
| Side marker lamp |
LED lamp |
| Electrical system |
1.Voltage: 24v 2. Receptacle: 7 ways (7 wire harness) German standard |
| Air line |
Double air line |
| Receptacle |
7 ways(7 wires harnesses) |
| Marking |
As Customer requirment |
| Accessories |
Head wrech ;spare wheel crank |
2.Product display:
3.Product details:
4.Photo of production workshop:
5.The process flow
1)cutting
use the plasma cutting machine cut the steel to little parts use for suitable welding and splicing
2)welding
after steel cutting process the next step is welding .this process the main work is beam welding .the top plate-bottom plate and the
middle plate will be welding together . this process will be use submerged arc welding process.this type of welding is very
special .its exclusively used in I beam welding .after this welding process other parts of the trailer will be use different welding way
for different steel-argon arc welding-electric arc welding-manual welding-gas welding and so on
3)blasting
this process is use for the first step of surface cleanness-stress relief-derusting before paiting .
4)electrophoresis coating
this process use for more detail surface cleanness
5)epoxy zinc primer spray coating
this process is the lasting one before paiting .after this process the trailer an be paiting
6)assembly
after all the process we have mationed .the last procedure of the trailer is assembly.this process all the parts will be assemly .it including tire-wheel rim-king pin-landing gear-suspension-spring leaf -brake chamber-air wiring-electricity wiring-brake system and so on
7)packing
The last process is packing .all the trailer use different packing way as customer requirment.after packing the trailer can be on the way to the customer
6.PRODUCT DETAILS
1)if welding line should be beautiful and strong.this process will be checking by the quality inspector of factory
2)surface should be clean and looks beautiful.
3)brake system should be adjust before the product leave the factory
4)lamp should my checking before leave the factory
5)all the parts should be reinforce .especially the bolt shoule be more reinforce before the produce leave the factory
7.FAQ
1)why you will select huayu trailer ?
because we pay more attention to our customer requirment.we produce as the customer requirment completely
2)what superiority huayu trailer have ?
good quality-good after-sales service-good cost performance.we are not the best but we will do our best to service for you
3)what product huayu can supply?
big trailer company not only have superiority product .our product is diversity
Audited Supplier 
){kind=link}
){kind=link}